Topic: QTP Questions & Answers Part-2

Message

QTP Question 11: What are the types of Object Repositorys 
in QTP? 

	What are the 
	types of Object Repositorys in QTP? 
QuickTest has two types 
	of object repositories for storing object information: 
	shared object 
	repositories and 
	action object 
	repositories. 
	You can choose which type of object repository you want to use as the 
	default type for new tests, and you can change the default as necessary for 
	each new test. 
The 
	object repository 
	per-action 
	mode is the default setting. In this mode, QuickTest automatically creates 
	an object repository file for each action in your test so that you can 
	create and run tests without creating, choosing, or modifying object 
	repository files. However, if you do modify values in an action object 
	repository, your changes do not have any effect on other actions. Therefore, 
	if the same test object exists in more than one action and you modify an 
	object's property values in one action, you may need to make the same change 
	in every action (and any test) containing the object.

QTP Question 12: Explain the check points in QTP? 

	Explain the 
	check points in QTP?
A 
	checkpoint verifies that expected 
	information is displayed in a Application while the test is running. You can 
	add eight types of checkpoints to your test for standard web objects using 
	QTP.

	A 
		page checkpoint
		checks 
		the characteristics of a Application

A 
		text checkpoint
		checks 
		that a text string is displayed in the appropriate place on a 
		Application. 

An 
		object checkpoint

		(Standard) checks the values of an object on a Application. 

An 
		image checkpoint
		checks 
		the values of an image on a Application. 

A 
		table checkpoint
		checks 
		information within a table on a Application

An 
		Accessibility 
		checkpoint checks the web page 
		for Section 508 compliance. 

An 
		XML checkpoint
		checks 
		the contents of individual XML data files or XML documents that are part 
		of your Web application.
	A 
	database checkpoint
	checks the 
	contents of databases accessed by your web site
QTP Question 13: In how many ways we can add check points 
to an application using QTP? 

	In how many ways 
	we can add check points to an application using QTP?
We can add checkpoints 
	while recording the application or we can add after recording is completed 
	using Active screen (Note: To perform the second one The Active screen must 
	be enabled while recording).

QTP Question 14: How does QTP identifies the object in 
the application? 

	How does QTP 
	identifies the object in the application?
QTP identifies the 
	object in the application by LogicalName and Class.
For example: 
The Edit box is 
	identified by 

	Logical Name : 
		PSOPTIONS_BSE_TIME20

Class: WebEdit

QTP Question 15: If an application name is changes 
frequently i.e while recording it has name, in this case how does QTP handles?

	QTP Question 15: If an application name is changes frequently i.e 
	while recording it has name “Window1” and then while running its “Windows2” 
	in this case how does QTP handles?

	QTP handles those situations using “Regular Expressions”.
QTP Question 16: What is Parameterizing Tests? 

	What is 
	Parameterizing Tests?
When you test your 
	application, you may want to check how it performs the same operations with 
	multiple sets of data. For example, suppose you want to check how your 
	application responds to ten separate sets of data. You could record ten 
	separate tests, each with its own set of data. Alternatively, you can create 
	a parameterized test that runs ten times: each time the test runs, it uses a 
	different set of data. 

QTP Question 17: What is test object model in QTP? 

	What is test object model in QTP?

	The test object model is a large set of object types or classes
	that QuickTest uses to represent the objects in your application. Each 
	test object class has a list of properties that can uniquely identify 
	objects of that class and a set of relevant methods that QuickTest can 
	record for it.

	A test object is an object that QuickTest creates in the test or 
	component to represent the actual object in your application. QuickTest 
	stores information about the object that will help it identify and check the 
	object during the run session.

	A run-time object is the actual object in your Web site or 
	application on which methods are performed during the run session. When you 
	perform an operation on your application while recording,

	QuickTest:

	➤ identifies the QuickTest test object class that represents the object on 
	which you performed the operation and creates the appropriate test object

	➤ reads the current value of the object’s properties in your application and 
	stores the list of properties and values with the test object

	➤ chooses a unique name for the object, generally using the value of one of 
	its prominent properties

	➤ records the operation that you performed on the object using the 
	appropriate QuickTest test object method

	For example, suppose you click on a Find button with the 
	following HTML

	source code:

	< type="submit" name="Find" value="Find">

	QuickTest identifies the object that you clicked as a WebButton
	test object. It creates a WebButton object with the name Find, and 
	records the following properties and values for the Find WebButton. It also 
	records that you performed a Click method on the WebButton.

	QuickTest displays your step in the Expert View like this:

	Browser("Mercury Interactive").Page("Mercury Interactive").

	WebButton("Find").Click 

QTP Question 18: What is Object Spy in QTP? 

	What is Object 
	Spy in QTP?

Using the Object Spy, 
	you can view the properties of any object in an open application. You use 
	the Object Spy pointer to point to an object. The Object Spy displays the 
	selected object’s hierarchy tree and its properties and values in the 
	Properties tab of the Object Spy dialog box.

QTP Question 19: What are Supported Check-Points in QTP?

QTP Question 20: What is the Diff between Image 
check-point and Bit map Check point? 

	What is the Diff 
	between Image check-point and Bit map Check point?
Image checkpoints enable 
	you to check the properties of a Web image. You can check an area of a Web 
	page or application as a bitmap. While creating a test or component, you 
	specify the area you want to check by selecting an object. You can check an 
	entire object or any area within an object. QuickTest captures the specified 
	object as a bitmap, and inserts a checkpoint in the test or component. You 
	can also choose to save only the selected area of the object with your test 
	or component in order to save disk Space For example, suppose you have a Web 
	site that can display a map of a city the user specifies. The map has 
	control keys for zooming. You can record the new map that is displayed after 
	one click on the control key that zooms in the map. Using the bitmap 
	checkpoint, you can check that the map zooms in correctly. 

You can create bitmap 
	checkpoints for all supported testing environments (as long as the 
	appropriate add-ins are loaded).
Note: 
	The results of 
	bitmap checkpoints may be affected by factors such as operating system, 
	screen resolution, and color settings.

Edited by Mithi25 - 13Aug2009 at 11:53pm

Author	Message
Mithi25 Senior Member Joined: 23Jun2009 Online Status: Offline Posts: 288	Topic: QTP Questions & Answers Part-2 Posted: 13Aug2009 at 11:47pm
	QTP Question 11: What are the types of Object Repositorys in QTP? What are the types of Object Repositorys in QTP? QuickTest has two types of object repositories for storing object information: shared object repositories and action object repositories. You can choose which type of object repository you want to use as the default type for new tests, and you can change the default as necessary for each new test. The object repository per-action mode is the default setting. In this mode, QuickTest automatically creates an object repository file for each action in your test so that you can create and run tests without creating, choosing, or modifying object repository files. However, if you do modify values in an action object repository, your changes do not have any effect on other actions. Therefore, if the same test object exists in more than one action and you modify an object's property values in one action, you may need to make the same change in every action (and any test) containing the object. QTP Question 12: Explain the check points in QTP? Explain the check points in QTP? A checkpoint verifies that expected information is displayed in a Application while the test is running. You can add eight types of checkpoints to your test for standard web objects using QTP. A page checkpoint checks the characteristics of a Application A text checkpoint checks that a text string is displayed in the appropriate place on a Application. An object checkpoint (Standard) checks the values of an object on a Application. An image checkpoint checks the values of an image on a Application. A table checkpoint checks information within a table on a Application An Accessibility checkpoint checks the web page for Section 508 compliance. An XML checkpoint checks the contents of individual XML data files or XML documents that are part of your Web application. A database checkpoint checks the contents of databases accessed by your web site QTP Question 13: In how many ways we can add check points to an application using QTP? In how many ways we can add check points to an application using QTP? We can add checkpoints while recording the application or we can add after recording is completed using Active screen (Note: To perform the second one The Active screen must be enabled while recording). QTP Question 14: How does QTP identifies the object in the application? How does QTP identifies the object in the application? QTP identifies the object in the application by LogicalName and Class. For example: The Edit box is identified by Logical Name : PSOPTIONS_BSE_TIME20 Class: WebEdit QTP Question 15: If an application name is changes frequently i.e while recording it has name, in this case how does QTP handles? QTP Question 15: If an application name is changes frequently i.e while recording it has name “Window1” and then while running its “Windows2” in this case how does QTP handles? QTP handles those situations using “Regular Expressions”. QTP Question 16: What is Parameterizing Tests? What is Parameterizing Tests? When you test your application, you may want to check how it performs the same operations with multiple sets of data. For example, suppose you want to check how your application responds to ten separate sets of data. You could record ten separate tests, each with its own set of data. Alternatively, you can create a parameterized test that runs ten times: each time the test runs, it uses a different set of data. QTP Question 17: What is test object model in QTP? What is test object model in QTP? The test object model is a large set of object types or classes that QuickTest uses to represent the objects in your application. Each test object class has a list of properties that can uniquely identify objects of that class and a set of relevant methods that QuickTest can record for it. A test object is an object that QuickTest creates in the test or component to represent the actual object in your application. QuickTest stores information about the object that will help it identify and check the object during the run session. A run-time object is the actual object in your Web site or application on which methods are performed during the run session. When you perform an operation on your application while recording, QuickTest: ➤ identifies the QuickTest test object class that represents the object on which you performed the operation and creates the appropriate test object ➤ reads the current value of the object’s properties in your application and stores the list of properties and values with the test object ➤ chooses a unique name for the object, generally using the value of one of its prominent properties ➤ records the operation that you performed on the object using the appropriate QuickTest test object method For example, suppose you click on a Find button with the following HTML source code: < type="submit" name="Find" value="Find"> QuickTest identifies the object that you clicked as a WebButton test object. It creates a WebButton object with the name Find, and records the following properties and values for the Find WebButton. It also records that you performed a Click method on the WebButton. QuickTest displays your step in the Expert View like this: Browser("Mercury Interactive").Page("Mercury Interactive"). WebButton("Find").Click QTP Question 18: What is Object Spy in QTP? What is Object Spy in QTP? Using the Object Spy, you can view the properties of any object in an open application. You use the Object Spy pointer to point to an object. The Object Spy displays the selected object’s hierarchy tree and its properties and values in the Properties tab of the Object Spy dialog box. QTP Question 19: What are Supported Check-Points in QTP? QTP Question 20: What is the Diff between Image check-point and Bit map Check point? What is the Diff between Image check-point and Bit map Check point? Image checkpoints enable you to check the properties of a Web image. You can check an area of a Web page or application as a bitmap. While creating a test or component, you specify the area you want to check by selecting an object. You can check an entire object or any area within an object. QuickTest captures the specified object as a bitmap, and inserts a checkpoint in the test or component. You can also choose to save only the selected area of the object with your test or component in order to save disk Space For example, suppose you have a Web site that can display a map of a city the user specifies. The map has control keys for zooming. You can record the new map that is displayed after one click on the control key that zooms in the map. Using the bitmap checkpoint, you can check that the map zooms in correctly. You can create bitmap checkpoints for all supported testing environments (as long as the appropriate add-ins are loaded). Note: The results of bitmap checkpoints may be affected by factors such as operating system, screen resolution, and color settings. Edited by Mithi25 - 13Aug2009 at 11:53pm
	Send Unlimited FREE SMS to Any Mobile Anywhere in INDIA, Click Here Post Resume: Click here to Upload your Resume & Apply for Jobs

	IP Logged


One Stop Testing Forum : Testing Tools @ OneStopTesting : QuickTest Pro @ OneStopTesting

Topic: QTP Questions & Answers Part-2

QTP Question 11: What are the types of Object Repositorys in QTP?

QTP Question 12: Explain the check points in QTP?

QTP Question 13: In how many ways we can add check points to an application using QTP?

QTP Question 14: How does QTP identifies the object in the application?

QTP Question 15: If an application name is changes frequently i.e while recording it has name, in this case how does QTP handles?

QTP Question 16: What is Parameterizing Tests?

QTP Question 17: What is test object model in QTP?

QTP Question 18: What is Object Spy in QTP?

QTP Question 19: What are Supported Check-Points in QTP?

QTP Question 20: What is the Diff between Image check-point and Bit map Check point?